For homeowners looking to cut down on their energy bills, Kelvinator air conditioner may be a good choice. Unlike many other air conditioning systems that only cool as temperatures get lower, Kelvinator air conditioner can maintain a constant cool temperature no matter what the outside temperature is. Some of these units are even able to cool water. However, before you buy one of these, there are a few things that you should know.
Basically, the average home-owner’s air conditioning unit has three different settings: cool, warm, and reverse cycle. The average central AC system in a home is rated at a cool 35 or so decibels, which is just below what is considered a “cool” temperature. A good way to figure out the overall cooling capacity of your current central AC unit is to simply turn it on and keep it running, then carefully test the room in which you intend to place the new air conditioning unit. You may find that you need to replace your existing window-wall air conditioning units with a newer model with a higher cooling capacity.
Most home cooling systems these days are made of ductwork that is separated into two areas. One type of ductwork is located indoors and carries cooling air from the outside unit to the indoor unit. The other type is outdoor unit ducts, which carry cooling air from the indoor unit to the outdoors. Typically, the split system is installed over a concrete slab; however, this is not always the best solution for a Kelvinator air conditioner because concrete is a poor heat conductor and can actually increase the overall cost of installing your new unit.
Another option that is available to you in terms of cooling your home is the “split” air conditioners. In this case, the ductwork is split into two, which allows for better cooling efficiency. Unfortunately, the spacing between the units is generally much smaller and can affect both the cooling efficiency and the airflow pattern of the cooling air that you receive. For this reason, many people prefer to install their own “split” air conditioners. There are a few advantages to these units, but the main drawback is the difficulty in accurately determining the correct spacing for your particular model.
Fortunately, there is an option available to you that will solve both of these problems. The “sleep mode” air conditioners are the most advanced and energy efficient of all the modern air conditioning options available. In sleep mode, the air conditioners run completely on auto-pilot, with no human interaction required whatsoever. All you have to do is set the time and date that you want them to begin and the unit will begin cooling as soon as the time expires. While this may seem like it is going to be a huge waste of money in the beginning, it actually has a couple of distinct advantages. First, by using less energy overall, the cost savings can be significant over time.
